| ANSI Z97.1 |
Performance Specifications and Methods of Test for
Safety Glazing Materials Used in Buildings |
| ASCE 7 |
Minimum Design Loads for Buildings and Other Structures |
| ASTM C 509 |
Standard Specification for Cellular Elastomeric
Preformed Gasket and Sealing Material |
| ASTM C 510 |
Standard Test Method for Staining and Color Change
of Single- or Multicomponent Joint Sealants |
| ASTM C 542 |
Standard Specification for Lock-Strip Gaskets |
| ASTM C 716 |
Standard Specification for Installing Lock-Strip Gaskets
and Infill Glazing Materials |
| ASTM C 793 |
Standard Test Method for the Effects of Accelerated
Weathering on Elastomeric Joint Sealants |
| ASTM C 794 |
Standard Test Method for Adhesion-in-Peel of Elastomeric
Joint Sealants |
| ASTM C 864 |
Standard Specification for Dense Elastomeric
Compression Seal Gaskets, Setting Blocks and Spacers |
| ASTM C 920 |
Standard Specification for Elastomeric Joint
Sealants |
| ASTM C 962 |
Standard Guide for Use of Elastomeric Joint
Sealants |
| ASTM C 964 |
Standard Guide for Lock-Strip Gasket Glazing |
| ASTM C 1036 |
Standard Specification for Flat Glass (Replaced DD-G-451(d)) |
| ASTM C 1048 |
Standard Specification for Heat-Treated Flat Glass-King
HS, King FT Coated and Uncoated (Replaced Federal Specification
DD-G-1403(b) and (c)) |
| ASTM C 1087 |
Standard Test Method for Determining Compatibility
of Liquid-Applied Sealants with Accessories Used in Structural Glazing
Systems |
| ASTM C 1115 |
Standard Specification for Dense Elastomeric
Silicone Rubber Gaskets and Accessories |
| ASTM C 1135 |
Standard Test Method for Determining Tensile Adhesion
Properties of Structural Sealants |
| ASTM C 1172 |
Standard Specification for Laminated Architectural
Flat Glass |
| ASTM C 1184 |
Standard Specification for Structural Silicone Sealants |
| ASTM C 1193 |
Standard Guide for Use of Joint Sealants |
| ASTM C 1249 |
Standard Guide for Secondary Seal for Sealed Insulating
Glass Units for Structural Sealant Glazing Applications |
| ASTM C 1281 |
Standard Specification for Preformed Tape Sealants
for Glazing Applications |
| ASTM C 1349 |
Standard Specification for Architectural Flat Glass
Clad Polycarbonate |
| ASTM E 283 |
Standard Test Method for Rate of Air Leakage Through
Exterior Windows, Curtainwalls and Doors
|
| ASTM E 330 |
Standard Test Method for Structural Performance of
Exterior Windows, Curtainwalls and Doors
by Uniform Static Air Pressure Difference |
| ASTM E 331 |
Standard Test Method for Water Penetration of Exterior
Windows, Curtainwalls and Doors by Uniform
Static Air Pressure Difference |
| ASTM E 336 |
Standard Test Method for Measurement of Airborne Sound
Insulation in Buildings |
| ASTM E 413 |
Standard Classification for Determination of Sound Transmission Class |
| ASTM E 488 |
Standard Test Methods for Strength of Anchors in Concrete
and Masonry Elements |
| ASTM E 546 |
Standard Test Method for Frost Point of Sealed Insulating
Glass Units |
| ASTM E 547 |
Standard Test Method for Water Penetration of Exterior
Windows, Curtainwalls, and Doors by Cyclic
Static Air Pressure Differential |
| ASTM E 576 |
Standard Test Method for Frost Point of Sealed Insulating
Glass Units in the Vertical Position |
| ASTM E 754 |
Standard Test Method for Pullout Resistance of Ties
and Anchors Embedded in Masonry Mortar Joints |
| ASTM E 773 |
Standard Test Methods for Seal Durability of Sealed
Insulating Glass Units |
| ASTM E 774 |
Standard Specification for Sealed Insulating Glass Units |
| ASTM E 783 |
Standard Method for Field Measurement of Air Leakage
Through Installed Exterior Windows and
Doors |
| ASTM E 894 |
Standard Test Method for Anchorage
of Permanent Metal Railing Systems and Rails for Buildings |
| ASTM E 966 |
Standard Guide for Field Measurement of Airborne Sound Insulation of
Building Facades and Facade Elements |
| ASTM E 987 |
Standard Test Methods for Deglazing Force of Fenestration
Products |
| ASTM E 997 |
Standard Test Method for Structural Performance of Glass in Exterior
Windows, Curtainwalls, and Doors Under the
Influence of Uniform Static Loads by Destructive Methods
|
| ASTM E 998 |
Standard Test Method for Structural Performance of Glass in Windows,
Curtainwalls, and Doors Under
the Influence of Uniform Static Loads by Nondestructive Method
|
| ASTM E 1017 |
Standard Specification for Generic Performance Requirements
for Exterior Residential Window Assemblies |
| ASTM E 1105 |
Standard Test Method for Field Determination of Water Penetration
of Installed Exterior Windows, Curtainwalls,
and Doors by Uniform or Cyclic Static Air Pressure Difference
|
| ASTM E 1233 |
Standard Test Method for Structural Performance of Exterior Windows,
Curtainwalls, and Doors by Cyclic Static
Air Pressure Differential
|
| ASTM E 1300 |
Standard Practice for Determining the Minimum Thickness
of Annealed Glass Required to Resist a Specified Load |
| ASTM E 1332 |
Standard Classification for Determination of Outdoor-Indoor
Transmission Glass |
| ASTM E 1425 |
Standard Practice for Determining the Acoustical Performance
of Exterior Windows and Doors |
| ASTM F 1233 |
Impact Tests for Security Glazing |
| ASTM STP 1054 |
Technology of Glazing Systems |
This material is adapted from the Glass Association of North America's
GANA Glazing Manual.
